Paravan PR Biolution User Manual Download Page 110

Page: 110 / 127

Gener

Information

epar
e

Oper
ate

Help

Technology

Technical equipment

110

20. Technical equipment

19.8.2 The charger

The purpose of the charger is to automatically charge the storage

batteries. The charger is housed in splashproof sheet-steel casing. It

complies with the guidelines and protection requirements of the:

›

Low Voltage Directive 2006/95/EC,

›

Electromagnetic Compatibility Directive 2004/108/EC.

Read the operating instructions included separately with the

charger.

19.8.3 Installing the charger, installation site

›

Only install in dry rooms.

›

Do not cover casing openings.

›

Ensure sufficient ventilation.

›

Do not install near to radiant heaters (e.g. under lamps, on heaters

etc.)

During the charging process, put the charger on the foot

supports of the wheelchair.

Fig. 71: Set up charger

Summary of Contents for PR Biolution
































































































































Search results

Summary of Contents for PR Biolution

Reviews:

Brands by name

Popular brands

Paravan PR Biolution, User Manual

Search results

Summary of Contents for PR Biolution

Reviews:

Brands by name

Popular brands