background image

THANK YOU!

Congratulations and Thank You for Choosing Parasound

Your new Parasound Halo Series A 52 power amplifier presents the latest advancements in
amplifier technology. The A 52 is built to the strict quality and performance standards set by
Parasound. We’re proud to offer you this exceptional audio component that will bring you many
years of enjoyment and dependability.

Here at Parasound, we design our products to perform at a higher level of flexibility and sonic
performance than you may have expected. We encourage you to read this entire manual to
learn all the features and capabilities of your new Halo Series A 52 Amplifier.

If you’re eager to get up and running right away, simply follow the basic step-by-step instruc-
tions to connect and operate the A 52. If you want to learn about some of the technical and
design aspects of your A 52, refer to the Technically Speaking and Parasound A 52 Design
Overview sections in the back of the manual. If you run into difficulties, the Troubleshooting
Guide should help you quickly remedy the problem.

We appreciate you taking the time to read these instructions and thank you for selecting
Parasound for your listening pleasure.

The Parasound Staff

Unpacking Your A 52

Unpack your A 52 from the shipping carton, remove the AC power cord and the control wire 
with a 2.5 mm sub-mini plug on each end. (This is the trigger connection wire). While you are
unpacking your new amplifier, inspect it thoroughly for possible shipping damage. If you see any,
contact your Parasound dealer right away. Be sure to save and store both the inner and outer 
cartons and the packing inserts for possible future transport. To save room for storage, you can
cut the seams on the bottom of the cartons and flatten them.

Keeping Records for Future Reference

Record the serial number located on the bottom of your A 52 in the space below. Also note 
your Parasound Dealer’s name and phone number. We recommend that you keep your purchase
receipt with this manual and store them both in a safe place. You may need to refer to this 
information sometime in the future.

Parasound A 52 Amplifier Serial #: __________________________________________________

Parasound Dealer: ________________________________________________________________

Phone Number:

__________________________________________________________________

Date of Purchase:  ________________________________________________________________

YOU SHOULD KNOW

There is no Parasound warranty for this unit if it was not purchased from an Authorized
Parasound Dealer. Investigate any warranty claims made by unauthorized dealers very 
carefully as you will need to depend entirely upon the dealer, and NOT upon Parasound.
Unauthorized dealers may lack the capability to arrange repairs of Parasound equipment.
Authorized Parasound Dealers are listed at www.parasound.com or you can call 
415-397-7100 between 8:30 am and 4:30 pm Pacific time.

A missing or tampered serial number could indicate that this unit was stolen or sold 
by an unauthorized dealer. If this unit is missing its serial number, you should return 
it to your dealer immediately for a full refund.

Summary of Contents for Halo A 52






















Reviews: