CONNECTING THE A 52 AC POWER CORD
AC Power Connections
We recommend that you plug your A 52 into the same AC wall outlet or power strip that pow-
ers your other audio components, especially the preamplifier or system controller. Having all
the audio components on the same power circuit helps prevent hum caused by possible ground
loops. The A 52 requires AC power that is continuous rather than switched on and off.
110 V - 120 V or 220 V - 240 V Operation
The A 52 can operate on either 110 V - 120 V or 220 V - 240 V. The correct line (or “AC mains”)
voltage for your unit is marked on its carton. Changing the A 52’s operating voltage involves
rewiring internal connections for both its main power transformer and standby power trans-
former, plus changing fuse values. Since there is a risk of electric shock, voltage changes
must be referred to a qualified technician.
What You’ll Need:
•
An IEC 65 AC Cord (provided)
•
An AC outlet or high quality AC power strip within reach of the AC cord
Before Connecting
❑
Remove power to all the components in your audio system.
To Connect
1
Plug the female end of the AC cord to the AC receptacle on the rear of the A 52.
2
Plug the male end of the AC cord to an AC outlet or power strip.
10
2
1
Ch 1
Ch 2
Ch 3
Ch 4
Ch 5
Input
Balanced
Unbalanced
Input
Balanced
Unbalanced
Input
Balanced
Unbalanced
Input
Balanced
Unbalanced
Input
Balanced
Unbalanced
Man
Balanced
Inputs
Unbalanced
Input
12 V
Output
Audio
Sensitivity
50 mV 250
Ground
Normal
Lift
WARNING
To Prevent Fire Or Shock Hazard,
Do Not Expose This Unit To Rain
Or Moisture.
Fuse
T15A/250V1-115V Area
T8A/250V-230V Area
AC 115V 60Hz
AC 230V 50Hz
Power Consumption: 1350W
Parasound Products, Inc.
San Francisco, CA USA
Manufactured under
license from Lucasfilm
Ltd. Lucasfilm and THX
are registered Trademarks
of Lucasfilm Ltd.
CAUTION
To Prevent Electric Shock, Do Not
Remove Cover. No User-Serviceable
Parts Inside, Refer Servicing To
Qualified Service Personnel.
Auto Turn On
L U C A S F
I
L M
L M
