Parasol
Heaters
Australia
‐
61
3
9549
4466
Page
8 of
11
Created
on
12/08/2009
11:58:24
PM
Installation/Operating
Instructions
I
I
N
N
S
S
T
T
A
A
L
L
L
L
A
A
T
T
I
I
O
O
N
N
I
I
N
N
S
S
T
T
R
R
U
U
C
C
T
T
I
I
O
O
N
N
S
S
This appliance must be installed by an authorised person.
1. The SunPhase heater is to be securely fixed to the wall by means of the
wall plate and mounting bracket. There are 4 bolt holes in the mounting
bracket. The heater weighs 5kg. The mounting bracket fixed to the
heater must not be modified in any way.
2. For fixing to a wall remove the wall plate from the mounting bracket as
detailed below:
Undo the nut on the J bolt and then
remove the bolt.
The bolt will slide out and then the
wall plate can be taken away from the
heater.
Securely attach the wall plate to the
wall, ensuring it is to the horizontal.
When replacing the ‘J’ Bolt ensure
the bolt is pushed fully into the holes
and that the heater is at the desired
tilt angle. Replace the nut.
If the heater is being fitted with an
outer case kit the angle must be 30
degrees which is the maximum down
tilt. This is the factory set position.
