Patio Heater Instructions
OZGLOW HE 40 Hi/Lo
INSTALLATION INSTRUCTIONS - OPTION A
1.
Fit the hanging
frame to an
overhead
beam.
Ensure
that
clearances detailed on the data plate
are adhered to (Brackets supplied by
installer).
2.
Screw the 15mm MI x 15mm copper
fitting supplied to the gas inlet of the
heater and point it at 90 degrees to the
front of the heater.
3.
Remove the socket assembly from
the frame and screw the top half of
this assembly to the heater using the
screws supplied.
4.
Fit the heater head to the bracket
and using the screws supplied, fix this
to the cone of the bracket.
© PARASOL HEATERS AUSTRALIA
+61 3 9549 4466 - Head 61 3 9546 6069
www.parasolheaters.com.au
Created on 24/09/2015
Page 11 of 18
