STEP 1
Wheel Assembly
Use M6 x 25mm bolts to attach wheel assembly brackets.
1-1 Place the 3 post mounting brackets on the Cylinder Base as shown.
1-2 Use 3-M8 x 16mm bolts to secure brackets to the base.
STEP 2
2-1 Place the short upright support onto the top of the post brackets, aligning
pre-drilled holes as shown.
2-2 Use 6-M6 x 35mm bolts, washers & nuts to attach post to post brackets.
Tighten securely.
2-3 Put the long pole onto the base of support post and use 4-M6x10mm bolts
STEP 3
Carefully, slide the tank cover over the post and onto the cylinder base. Tank
ASSEMBLY INSTRUCTIONS - 7
For questions, replacement parts, service help or other assistance,
please call the Customer Service Hotline!
1
2
2-3
3
