background image

2

Thank you for purchasing products from the Paramount FS line. Because of the many unique 
features included in these machines, this manual was created to provide you with information on 
how to properly install and maintain your equipment. Proper maintenance will ensure that your 
new equipment will last for years.

For your convenience, product questions can be answered by an Authorized Paramount Dealer or 
by contacting a Paramount Customer Service Representative at:

1-800-721-2121 or 1-323-721-2121

Office hours are Monday-Friday, 7:30 am - 4:30 pm PST

Or email us at [email protected]

Thank You for your patronage.

Paramount Fitness Corporation
6450 East Bandini Blvd.
Los Angeles, CA 90040

IMPORTANT

SERIOUS INJURIES TO USERS, BYSTANDERS OR INSTALLERS CAN OCCUR IF THE 
INSTRUCTIONS AND WARNINGS CONTAINED IN THIS MANUAL ARE NOT FOLLOWED. TO 
MINIMIZE THIS RISK, READ THE MANUAL BEFORE BEGINNING THE INSTALLATION TO 
FAMILIARIZE YOURSELF WITH ITS CONTENTS AND THEN BE CERTAIN TO FOLLOW EACH 
OF THE STEPS AND PRACTICES DESCRIBED. IN ADDITION, REVIEW THE GENERAL 
MAINTENANCE MANUAL, FACILITY SAFETY SIGN AND OTHER DOCUMENTS THAT MAY 
ACCOMPANY EACH MACHINE, FOR IMPORTANT SAFETY AND MAINTENANCE TIPS. THE 
MANUAL HAS BEEN INCLUDED WITH YOUR MACHINE ORDER AND CAN ALSO BE 
DOWNLOADED FROM OUR WEBSITE AT: http://www.paramountfitness.com

PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE.

A M

ESSAGE

 

TO

 O

UR

 C

USTOMERS

!

Summary of Contents for FS-56





























Reviews: