background image

4

F

ACILITY

 

AND

 U

SER

 S

AFETY

 P

RECAUTIONS

1.  Review and understand all of the warning labels affixed to this machine and on the facility 

safety sign.

2.  Be certain that the machine operation is understood before it is used. Refer to the 

instructional Procedure Label affixed to the machine. 

3.  Make sure all users are properly trained on how to use this equipment. If this machine is 

being used in a commercial setting, end users may not have access to this Owners Manual. It 
is the responsibility of the facility to instruct users as to the proper usage of the equipment as 
well as making them aware of potential hazards.

4.  Use each machine only for the intended exercise. Do not allow anyone to invent exercises not 

included on the Instructional Procedure Label or the Intended Use Label.

5.  Do not modify the machine.

6.  This equipment meets industry safety standards for stability when used for the intended 

exercise. Do not allow straps, resistance bands or other means to be attached to the 
framework of this machine to perform stretching or body weight exercises. This can result in 
machine instability and lead to serious crushing injuries.

7.  Keep children away from this equipment. Adults should closely supervise use by teenagers.

8.  It is recommended that users receive a thorough medical exam before commencing an 

exercise program. All medical issues should be reviewed to ensure that weight training will 
not aggravate pre-existing medical conditions.

9.  If the machine appears damaged or inoperable, contact a facility staff member to place an 

“OUT OF ORDER, DO NOT USE” sign on the machine until it is repaired. Only use Paramount 
supplied replacement components to service this machine.

10.  Instruct users not to wear loose or dangling clothes or have headphone wires hanging when 

using this equipment. 

11.  Do not attempt to free any jammed assemblies by yourself as this may cause injury.

12.  On Plate Loaded and Free Weight machines:

12a.  Use of spotter(s). Instruct users to seek the advice of the facility staff as to the 

appropriate use of spotters when lifting. More then one spotter may be required 
depending upon the amount of weight being lifted.

12b.  Instruct users to load weight plates evenly and carefully (one side and then the other) 

to avoid tipping equipment and crushing injuries.

12c.  If the machine is equipped with safety stops or catches, inspect them and verify their 

proper operation before use and make sure they are securely in place before using or 
exiting the machine. Be certain members are instructed on how to operate and adjust 
all safety mechanisms.

S

AFETY

Summary of Contents for FS-56





























Reviews: