2
Attaching the lifting pole
●
Load capacity is 76kg. Do not hang an article exceeding the load capacity because it may damage
the lifting pole, resulting in an injury.
■
The lifting pole can be used for support to raise the body from the bed by attaching to the bed.
It can be used for training too.
①
Detatch the headboard and raise the back section base.
②
Set the attachment on the main frame of the bed.
③
Attach the outer pipe to the main frame and the
attachment with 2 long bolts and 2 nuts as shown
in figure.
④
Fix the outer pipe and the attachment with 2 short
bolts and 2 nuts as shown in figure.
⑤
Attach the headboard and lower the back section base.
⑥
Inset the arm into the outer pipe and attach the grip to
the arm.
⑦
Tighten the knob bolt and knob nut to fasten the arm.
⑧
Pull down the grip to make sure that the lifting pole is
attached firmly.
Arm
Knob bolt
Grip
●
The lifting pole can be attached on both the right
side and the left side of the bed.
●
The arm can be set in three positions.
Outer pipe
Arm
Knob bolt
Attachment
Long bolt, Nut
Short bolt, Nut
Attachment
Outer pipe
Summary of Contents for CA-A307E
