PARAMOUNT BED CA-A307E, Instruction Manual

Page: 20 / 28

USING THE PRODUCT
3
SING THE PR ODUCT
●
Attach the oxygen cylinder holder to any of the accessory attachment holes
on the two corners of head end of the medical device. If you attach the
oxygen cylinder holder to a hole other than the accessory attachment hole,
the oxygen cylinder holder may detach and fall on your foot during medical
device operation, resulting in injury, or the oxygen cylinder holder or the
medical device may be damaged or deformed.
● Before use, make sure that the knob bolt is firmly tightened. If it is not
tightened enough, the oxygen cylinder may be unstable and oxygen supply
may be interrupted.
● When using the oxygen cylinder, use caution not to allow the flowmeter, etc.
to come into contact with a person or object around the medical device. If a
contact happens, the flowmeter or the oxygen cylinder holder may be
damaged, resulting in injury.
Attach the oxygen cylinder holder to any of the accessory attachment holes on the two corners of head
end of the medical device (see the figure below).
Be sure to use a 1,000 L to 1,500 L oxygen cylinder (from 14 cm to 15.5 cm in diameter).