PARAMOUNT BED A6 Series, Instruction Manual

Page: 116 / 120

115
Guidance and manufacturer’s declaration — electromagnetic immunity
The bed is intended to be used in an electromagnetic environment where RF radio communication devices are used. The
electromagnetic interference between the RF communication device and the bed can be prevented by maintaining the
minimum distance between the two as recommended below in accordance with the maximum output and frequency of the
communication device.
Immunity test
IEC 60601-1-2
Test level
Compliance
level
Bandwidth
(MHz)
Service Modulation
Maximum
output
(W)
Distance
(m)
Proximate
electromagnetic
field
IEC 61000-4-3
27 V/m
385 MHz
27 V/m 380 to 390 TETRA 400
Pulse
modulation
18 Hz
1.8 0.3
28 V/m
450 MHz
28 V/m 430 to 470
GMRS 460,
FRS460
Pulse
modulation
18 Hz
2 0.3
9 V/m
710 MHz
9 V/m 704 to 787 LTE band 13, 17
Pulse
modulation
217 Hz
0.2 0.3
9 V/m
745 MHz
9 V/m
780 MHz
28 V/m
810 MHz
28 V/m 800 to 960
GSM 800/900,
TETRA 800,
iDen 820,
CDMA 850,
LTE band 5
Pulse
modulation
18 Hz
2 0.3
28 V/m
870 MHz
28 V/m
930 MHz
28 V/m
1720 MHz
28 V/m 1700 to 1990
GSM 1800;
CDMA 1900;
GSM 1900;
DECT;
LTE band 1, 3, 4,
25; UMTS
Pulse
modulation
217 Hz
2 0.3
28 V/m
1845 MHz
28 V/m
1970 MHz
28 V/m
2450 MHz
28 V/m 2400 to 2570
Bluetooth,
WLAN,
802.11 b/g/n,
RFID 2450,
LTE band 7
Pulse
modulation
217 Hz
2 0.3
9 V/m
5240 MHz
9 V/m 5100 to 5800 WLAN 802.11 a/n
Pulse
modulation
217 Hz
0.2 0.3
9 V/m
5500 MHz
9 V/m
5785 MHz
5
REFERENCE INFORMATION