33
32
12.
BATTERY
12.1 CHARGING THE BATTERY
The Paralenz Dive Camera comes with an integrated LiPo 1600
mAh battery.
Use the included USB-C cable for charging. Charge the camera
through your computer or use a wallcharger – preferably a 2.1 A
USB power adapter. See
section 2.4
for information about how
to charge the battery.
WARNING: Do not use the camera or the battery if it has been
damaged – for example, if cracked or punctured. Disassem-
bling or puncturing the battery can cause an explosion or fire.
Do not store the camera where prolonged exposure to
extreme temperatures can occur, because it can cause
permanent damage. Do not dry the camera or battery with an
external heat source such as a microwave oven or hair dryer.
Do not store your battery with metal objects. If the battery
terminals come in contact with metal objects, the battery
may “shortout” and cause a fire.
Reformatting the SD-card will delete all data, so make sure to
save the footage you want to keep on your computer before
reformatting the card.
13.
TROUBLESHOOTING
13.1 What to do if the camera should freeze or won't turn on
In case of the camera freezing and not responding, you can
always do a hard-reset:
1.
Turn the selector ring to power position.
2.
Plug in the charger.
3.
Hold the activation switch for 10 seconds.
- The camera will now reboot.
13.2 If the SD-card needs to be reformatted
When formatting the memory card on a PC/MAC it needs to be
formatted with the FAT32 format (32kb) for up to 32 GV and ex-
FAT for 64 GB cards.
The SD-card can also be reformatted through the camera. See
section 6.7.1
for information on how to format.
