Paralenz DIVE CAMERA, User Manual

Page: 13 / 22

25 24
6.7.4 Flip display
If you’re mounting the camera upside down, this function
allows you to flip the OLED display and the image.
6.7.5 Choose units
This function allows you to choose which units of measure to
display.
6.7.6 Zero depth
The Zero depth function lets you calibrate the depth sensor
inside your Paralenz Dive Camera to zero. You can use this
function if you should experience that the sensor is slightly off
in your dive logs and the corresponding media.
7. MOUNTS
There are two mounts in the box; The Universal Mount and the
Mask Mount. The Universal Mount enables you to use most
of the existing accessories on the market. The Mask Mount is
designed to fit all regular diving masks
Press the center of the mount and the top of the camera
together to fasten the camera to the mount. Make sure both
latches are fastened correctly. Do not use excessive force.
7.1 INCLUDED MOUNTS
7.2 THE T-RAIL CLICK SYSTEM
Universal Mount Mask Mount
*Click*
*Click*
Make sure that both sides are fastened
6.7.3 Reset settings on the camera
If ‘reset’ is selected, you must confirm that you want to reset
the settings on the camera to factory defaults.