Paragon P7, Installation & Maintenance Instructions Manual, Page: 16 / 28

16 LT6757 ( Iss 1 06/14 )
P7 Installation Instructions
SECTION NINE To Install the Appliance continued
Fireplace Frame Option

At this point the fireplace will need to be
constructed.

When using this method, the EDB unit will
need to be removed from the fire box base
and relocated using the bracket provided
within the Fireplace frame assembly

Offer the fireplace frame assembly up to
the firebox and secure using the 4 off fixing
screws provide

Connect battery pack as described in
section 2. (Operating the appliance).
Locate the battery pack in the holder positioned within the fireplace frame.

Inset the inlet Cover within the fireplace
frame.

Operate the handset as described in section
one.

Lay the fuel bed as described in section
four.
Four Sided Trim Option
.

Fit Air tray assembly and lay fuel bed as
described in section four.

Connect the battery pack as described in
section one with the insulation sleeve
provided. Place on the fire box base along
the front edge on the left hand side.

Offer the inner fascia and secure using
the screws provided.