manualshive.com logo in svg

Paragon EL71, General Instructions Manual, Page: 41 / 60

Share
Download
Paragon EL71 General Instructions Manual Download Page 41

Programming:

STEP KEY

DESCRIPTION

1.

RESET

Clears control’s memory. Control is finished initializing when # stops flashing
(about 6 seconds).

2.

NEXT

Display shows MAINtAin (maintained relay operation).

3 .

+

Toggle to MOMENTARY (momentary relay operation).

4.

PROGRAM Display shows TIME header.

5.

NEXT,+,-

Use these keys to set time, date and daylight savings time information.

6.

PROGRAM Press PROGRAM key to step through headers until ASTR (astro header) is

reached.

7.

NEXT

Sunrise time is displayed with hours flashing.

8.

+/-

Set to today’s sunrise hour.

9.

NEXT

Sunrise minutes are flashing.

10.

+/-

Set to today’s sunrise minutes.

11.

NEXT

Sunset time is displayed with hours flashing.

12.

+/-

Set to today’s sunset hour.

13.

NEXT

Sunset minutes are flashing.

14.

+/-

Set to today’s sunset minutes.

15.

NEXT

LATT N-10o is displayed (latitude 10˚ north).

16.

+/-

Roll to the desired latitude.

17.

NEXT

Displays CHAN 1 NO.

41

Summary of Contents for EL71





























































Reviews:

No comments