Programming:
STEP KEY
DESCRIPTION
1.
RESET
Clears control’s memory. Control is finished initializing when # stops flashing
(about 6 seconds).
2.
NEXT
Display shows MAINtAin (maintained relay operation).
3.
PROGRAM
Display shows TIME header.
4.
NEXT,+,-
Use these keys to set time, date and daylight savings time information.
5.
PROGRAM
Press PROGRAM key to step through headers until EVNT (event header) is
reached.
6.
NEXT
First event is shown with event # flashing.
7.
NEXT
Event type is flashing.
8.
+
Select OFF event type.
9.
NEXT
Channel no.1 is flashing. This is the desired channel.
10.
NEXT
Hours are flashing.
11.
-
Roll backward to select 5 PM.
12.
NEXT
Minutes are flashing. 00 is desired value.
13.
NEXT
SUN is flashing. NO is displayed
14.
NEXT
MON is flashing. NO is displayed.
15.
+
Change NO to YES. Step through remaining days and select YES for TUE,
WED, THU, FRI and HOLIDAY A.
37