Using the Navigation Wizard
2-11
7800-A2-GB28-80
May 1999
Setting Frame and Burst Ranges
For FrameSaver SLV devices, you can configure frame size and burst count
ranges for those devices that have been added to the Device Display Area using
the Set (read/write) Community string. These configurations affect the Analysis
view for Real Time and Historical Charts.
NOTE:
The Configure Device component requires Write access to a device. You set
this access by using the Set (Write) Community string when you add devices
to the Device Display Area. See
Populating the Device Display Area
on
page 2-4 for more information on adding devices.
In the following procedure, the documented steps use Frame Ranges as an
example. Although the values for frame ranges and burst ranges differ, the
procedure for setting these options remain the same.
