8
March
2003
8700-A2-GN10-40
Entering Identity Information
After accessing your unit for the first time, use the Change Identity screen to
determine SNMP administrative system information that will be displayed on the
Identity screen of the Status branch. To access the Card Identity screen, follow this
menu selection sequence:
Main Menu
→
Control
→
Change Identity
Configuring the Unit
Configuration option settings determine how the unit operates. Use the
Configuration branch of the termination unit’s menu to display or change
configuration option settings.
The unit is shipped with factory settings in the Default Factory Configuration area.
If the factory default settings do not support your network’s configuration,
customize the configuration options for your application.
Accessing and Displaying Configuration Options
To display the configuration options, you must first load a configuration option set
into the edit area.
To load a configuration option set into the configuration edit area, follow this menu
selection sequence:
Main Menu
→
Configuration (Load Configuration From)
Make a selection by placing the cursor at your choice and pressing Enter.
If you select . . .
Then . . .
Current
Configuration
The selected configuration option set is loaded and the
Configuration Edit/Display menu screen appears.
Configuration
Loader
The Configuration Loader screen is displayed allowing you to
upload or download configurations from a TFTP server.
Default Factory
Configuration
The default factory configuration is loaded and the Configuration
Edit/Display menu screen appears.
