B. Standards Compliance for SNMP Traps
8774-A2-GB20-40
February 2001
B-3
Enterprise-Specific Traps
The enterpriseSpecific trap indicates that an enterprise-specific event has
occurred. The Specific-trap field identifies the particular trap that occurred.
The following table lists the enterprise-specific traps supported by the unit:
There are no variable-bindings for enterpriseDeviceFail and
enterpriseConfigChange. The variable-binding for enterpriseSelfTestFail
is devSelfTestResults.
SNMP Trap
Description
Possible Cause
enterpriseSelfTestFail(2)
A hardware failure of the
unit is detected during the
unit's self-test. The trap is
generated after the unit
completes initialization.
Failure of one or more of the
unit's hardware components.
enterpriseDeviceFail(3)
An internal device failure.
Operating software has
detected an internal device
failure.
enterpriseTestStart(5)
A test is running.
At least one test has been
started on an interface.
enterpriseConfigChange(6)
The configuration changed
via the user interface. The
trap is sent after
60 seconds have elapsed
without another change.
This suppresses the
sending of numerous traps
when multiple changes are
made in a short period of
time, as is typically the case
when changing
configuration options.
Configuration has been
changed via the ATI.
enterpriseTestStop(105)
All tests have been halted.
All tests have been halted on
an interface.
Summary of Contents for Hotwire 8774
Page 24: ...2 Using the Asynchronous Terminal Interface 2 10 February 2001 8774 A2 GB20 40 ...
Page 62: ...5 Testing 5 12 February 2001 8774 A2 GB20 40 ...
Page 68: ...6 Messages and Troubleshooting 6 6 February 2001 8774 A2 GB20 40 ...
Page 100: ...D Technical Specifications D 2 February 2001 8774 A2 GB20 40 ...
