Paradyne Hotwire 8774, User Manual

Page: 15 / 110

8774-A2-GB20-40 February 2001
2-1
2
Using the Asynchronous
Terminal Interface
User Interface Access
You can communicate with the asynchronous terminal interface (ATI) using one of
the following methods:
„
Direct connection through the Management Serial port of the DSLAM (locally
or via an external modem).
„
Telnet session using a Network Management System (NMS) connected to a
LAN/WAN port on the DSLAM.
„
Telnet session through the Embedded Operations Channel (EOC).
NOTE:
Only one ATI session can be active at a time, and another user’s session
cannot be forced to end. To automatically log out a user due to inactivity,
enable the Inactivity Timeout option. To enable the Inactivity Timeout option
(refer to
Table A-5, Telnet Session Options, in Appendix A,
Configuration
Options ).
Security can limit ATI access several ways. To set up security or a login ID, refer to
Chapter 7,
Security
.
Management Serial Port Settings
Ensure that the device you connect communicates using these settings:
„
Data rate set to 9.6 kbps.
„
Character length set to 8.
„
Parity set to None.
„
Stop Bits set to 1.
Refer to the installation document for your DSLAM.