Paradyne Hotwire 7986 M/HDSL, User Manual

Page: 17 / 122

2-1
7986-A2-GB20-00 September 1998
Using the Asynchronous Terminal
Interface
2
User Interface Access
You can communicate with the Hotwire Model 7986 Standalone Termination Unit
with an asynchronous terminal interface (ATI) using one of the following methods:
H
Direct connection through the COM port.
H
Telnet session through the Embedded Operations Channel (EOC).
NOTE:
Only one terminal interface session can be active at a time, and another
user’s session cannot be forced to end. To automatically log out a user due to
inactivity, enable the Inactivity Timeout option (see Table A-5,
Telnet Sessions
Options , in Appendix A,
Configuration Option Tables).
Security can limit ATI access several ways. To limit user access or set up login
IDs, refer to
Chapter 7,
Security
.
Communication Port Settings
Ensure that the device you connect communicates using these settings:
H
Data rate set to 9.6 kbps.
H
Character length set to 8.
H
Parity set to None.
H
Stop Bits set to 1.