Paradyne FrameSaver DSL 9783 CSU/DSU, Installation Instructions Manual, Page: 18 / 28

18
Verifying End-to-End Management Path
After installation of a remote CSU/DSU, run an ATM Ping test from the Hotwire
®
GranDSLAM.
Procedure
To Ping the router:
1. From the Hotwire 8335 ATM Line Card’s Main Menu, select the ATM Ping test.
Diagnostics
→
ATM Ping (D-C)
2. Enter a VPI of 0 and a VCI of 35.
3. Select Towards the Endpoint, then Start.
4. If the test is successful, select Towards the Network, then Start.
If both tests are successful, the VC has been tested from end to end.
For additional information on the Hotwire ATM Line Card, refer to the
Hotwire ATM Line
Cards, Models 8335 and 8365, User’s Guide, Document No. 8335-A2-GB20.
Checking That Data is Being Received
Procedure
To verify that data is being received:
1. From the unit’s Main Menu, select either interface’s frame relay statistics.
Main Menu
→
Status
→
Performance Statistics
→
Frame Relay
→
Net1-FR1
2. Repeatedly Refresh the screen to:
— Verify that the counts for Frames Received and Characters Received under the
Frame Relay Link statistics are increasing.
— Verify that there are no errors under Frame Relay Errors.
If data is not being received or you are receiving errors, check your cable
connections and replace or repair a damaged cable.
3. Return to the Status menu.