8
Installing the NAM into the Access Carrier
CAUTION:
Be sure that you install the NAM in the correct slot so that it mates with its
matching I/O card. Otherwise, you could damage your card.
1. Remove the NAM from the shipping box. Handle only by the top and bottom edges
to avoid damaging the card.
2. At the front of the carrier, align the NAM with the upper and lower tracks of
the appropriate slot.
97-15754
Ejector
Latches
Front View
3. Slide the NAM into the tracks until it seats with the midplane connectors. Use care
not to force the card or bend any pins.
4. Close both the upper and lower ejector latches on the carrier to lock the card in
place, then tighten the captive screws on the ejector latches.
