Custom Network Interface Settings
5-7
6700-A2-GB22-20
February 1998
Table 5-4.
Modem Settings Dialog Box Fields
Field
Description
Dial
Dial commands (prefix and suffix).
Hangup
Hangup commands (prefix and suffix).
Binary TX
Binary transmission commands (prefix and suffix).
Binary RX
Binary receive commands (prefix and suffix).
Answer
Answer on number of rings.
Originate
Set originate state.
Initialize
Set initial state.
Exit
Exit AT command set.
Modem Defaults
Set all fields to selected default (none, Hayes compatible,
Telebit, or MultiTech).
Specifying Dial Settings
Use Dial... to specify dial parameters for SLIP interfaces.
Procedure
1. Choose Settings... from the Network menu. The
Custom window
appears, as
shown on page 5-1.
2. Choose Setup from the Custom window menu bar.
3. Choose Dial... from the Setup menu. The Dial Settings dialog box appears.
Table 5-5 describes the fields on the Dial Settings dialog box.
