Configuration Files and Interfaces
3-2
6700-A2-GB22-20
February 1998
Interfaces
Use the Interface menu on the Custom window to add, duplicate, or delete an
interface. You must configure at least one interface.
Adding an Interface
Use Add on the Custom window’s Interface menu to add an interface to a
configuration file.
Procedure
1. Choose Settings from the Network menu. The Custom window appears.
2. Choose Interface from the Custom window menu bar.
3. Choose Add from the Interface menu. The Add Interface window appears.
4. Select the type of interface using the selection list button to the right of the
Type field.
5. Enter the name of the interface in the Name field. The default is Ethernet0.
6. Choose OK.
Duplicating an Interface
Use Duplicate on the Custom window’s Interface menu to create copies of an
interface that differ only slightly. For example, use Duplicate for the same IP,
subnet, and port where each interface has its own telephone number.
Procedure
1. Choose Settings from the Network menu. The
Custom window
appears, as
shown on page 3-1.
2. Select the interface from the bottom of the Custom window.
3. Choose Interface from the Custom window menu bar.
