Custom Network Interface Settings
5-5
6700-A2-GB22-20
February 1998
Procedure
1. Choose Settings... from the Network menu. The
Custom window
appears, as
shown on page 5-1.
2. Choose Setup from the Custom window menu bar.
3. Choose Port... from the Setup menu. The Port Settings dialog box appears.
Table 5-3 describes the fields on the Port Settings dialog box.
NOTE:
SLIP, CSLIP, and PPP are 8 bit protocols and must have the following
settings: 8 Data Bits, 1 Stop Bit, and None Parity.
4. Change the port settings, as needed.
5. Choose OK.
Table 5-3.
Port Settings Dialog Box Fields
Field
Description
Baud Rate
Transfer data rate.
Data Bits
Number of data bits per byte.
Stop Bits
Number of stop bits.
Parity
Parity.
Flow Control
Flow control for data transmission.
Connector
Communications port to use.
Parity Check
Enables indication of byte where parity error exists.
Carrier Detect
Indicates modem signal should be used.
