Paradyne 8540, Network Configuration Manual

Page: 92 / 130

Network Configuration Worksheets
A-13 8000-A2-GB21-20 November 1997
IP Network Screen A-C-B
Prompt Your Configuration Setting
For DSL port 2 (s1d):
1. Enter the interface name at the
Input
Interface Name:
prompt.
IP Interface = s1d
2. Enter the port 2 RTU’s IP address at
the
(nnn.nnn.nnn.nnn)or
address-pool:
prompt.
Peer IP Address =
3. Enter route type HOST at the
Route
to peer (host/net):
prompt.
Route to Peer= HOST
For DSL port 3 (s1e):
1. Enter the interface name at the
Input
Interface Name:
prompt.
IP Interface = s1e
2. Enter the port 3 RTU’s IP address at
the
(nnn.nnn.nnn.nnn)or
address-pool:
prompt.
Peer IP Address =
3. Enter route type HOST at the
Route
to peer (host/net):
prompt.
Route to Peer= HOST
For DSL port 4 (s1f):
1. Enter the interface name at the
Input
Interface Name:
prompt.
IP Interface = s1f
2. Enter the port 4 RTU’s IP address at
the
(nnn.nnn.nnn.nnn)or
address-pool:
prompt.
Peer IP Address =
3. Enter route type HOST at the
Route
to peer (host/net):
prompt.
Route to Peer= HOST