SNMP Configuration Worksheets
C-5
8000-A2-GB21-20
November 1997
Preventing Unauthorized Access
Use the SNMP Security screen to enable SNMP security (i.e., prevent
unauthorized managers from browsing or configuring the HotWire DSLAM
network).
If address security is to be activated, it should be activated on the MCC and
all DSL cards.
If the NSP wants to allow an ISP or customer access to a limited set of DSL
cards, that NMS’s IP address should only be entered on those DSL cards in
the limited set.
Access the . . .
By . . .
SNMP Security screen
Selecting
Configuration
→
SNMP
→
Security
(A-F-A) from the HotWire – MCC menu if
configuring the MCC card.
Selecting
Configuration
→
SNMP
→
Security
(A-F-A) from the HotWire – DSL menu if
configuring a DSL card.
NOTE:
The following screen is the SNMP Security screen from the HotWire – DSL
menu. The SNMP Security screen from the HotWire – MCC menu is not
shown. Note, however, the HotWire – MCC SNMP Security screen does not
show the bottom half of the screen (i.e., the RTU security section).
