Paradyne 7984, User Manual

Page: 41 / 165

Initial Startup and Configuration
3-13
7970-A2-GB20-00 August 1999
Saving Configuration Options
When changes are made to the configuration options through the Configuration
Edit/Display branch, the changes must be saved to take effect. Use the Save key
or Save Configuration screen.
"
Procedure
To save configuration options changes:
1. Press Ctrl-a to switch to the screen function key area below the dotted line.
2. Select Save and press Enter.
NOTE:
When Exit is selected before Save, or Save has been selected from any
menu in the Configuration/Edit branch, a Save Configuration screen appears
requiring a Yes or No response.
Î
Î
ÎÎ
ÎÎ
main/config/saveprompt Hotwire
Model: 79xx
SAVE CONFIGURATION
Save Changes? No
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Command Complete
If you select . . . Then . . .
Yes The configuration is saved.
No The Main Menu appears and changes are not saved.
If the Telnet Session configuration option is changed, a message is displayed on
the Save Configuration screen warning that an answer of Yes will cause the
Telnet session to disconnect. Do not answer Yes unless you are prepared to
disconnect.
If the DSL Mode configuration option is changed, a message is displayed on the
Save Configuration screen warning that an answer of Yes will cause the system
to be reset. Do not answer Yes unless you are prepared to reset the unit.