Configuration Option Tables
A-13
7610-A2-GB20-10
November 1997
Table A-4.
Terminal Port Options (3 of 3)
Inactivity Timeout
Possible Settings: Enable, Disable
Default Setting: Disable
Provides automatic logoff of an ATI session through the Terminal Port. When the
session is closed, User Interface Idle appears on the screen and the unit toggles the
Terminal port DSR lead.
Enable – The ATI session terminates automatically after the Disconnect Time set in the
next option. When the session was occurring over an external modem connected to the
Terminal port, the modem will interpret the DSR toggle as DTR being dropped and
disconnect.
Disable – An ATI session through the Terminal port will remain active indefinitely.
Disconnect Time(minutes)
Possible Settings: range 1 – 60
Default Setting: 5
Number of minutes of inactivity before the ATI session terminates automatically.
Timeout is based on no keyboard activity.
Disconnect Time(minutes) option appears when Inactivity Timeout is enabled.
1 to 60 – The ATI user session is closed after the selected number of minutes.
Management Port Options
To access the Management Port Options screen, follow this menu selection
sequence:
Main Menu
→
Configuration
→
Load Configuration From
→
Edit
→
User Interface
→
Management Port
Table A-5.
Management Port Options (1 of 3)
Port Use
Possible Settings: Net Link, Alarms, None
Default Setting: Net Link
The Management port provides a choice of functions.
Net Link – The Management port is the network communication link and provides
connectivity to an IP network to support SNMP managers and Telnet sessions.
Alarms – The Management port is dedicated as an alarm port and sends out ASCII
alarm messages.
None – Disables the Management port.
No other fields in this table will appear when set to None.
