19
Communication Port (Management and Communication Options)
Select Communication Port to configure the unit’s COM port.
External Modem (Management and Communication Options)
Select External Modem (on Com Port) to configure the communications port when it is
connected to an external device like an external modem.
Communication Port
Configuration Option
Settings
Default in [Bold]
Port Use
[Terminal], Net Link
When Port Use is set to Terminal:
Data Rate (Kbps)
9.6, 14.4, [19.2], 28.8, 38.4, 57.6, 115.2
Character Length
7, [8]
Parity
[None], Even, Odd
Stop Bits
[1], 2
Ignore Control Leads
[Disable], DTR
Login Required
Enable, [Disable]
Port Access Level
[Level-1], Level-2, Level-3
Inactivity Timeout
[Enable], Disable
Disconnect Time (Minutes)
1–60
[10]
When Port Use is set to Net Link:
Data Rate (Kbps)
9.6, 14.4, [19.2], 28.8, 38.4, 57.6, 115.2
Character Length
7, [8]
Parity
[None], Even, Odd
Stop Bits
[1], 2
Ignore Control Leads
[Disable], DTR
IP Address
001.000.000.000–223.255.255.255, [Clear]
Subnet Mask
[000.000.000.000]–255.255.255.255, Clear
RIP
[None], Standard_out
External Modem (on Com Port)
Configuration Option
Settings
Default in [Bold]
External Modem Commands
[Disable], AT
Dial-In Access
[Enable], Disable
