Firmly screw the vertical and horizontal antennas to the
corresponding "
ANT
" connections on the Receiving
Module as shown in figure 3 or 4. Use of the horizontal
antenna is optional, but is recommended for best results.
Do not cut, bend or alter the antenna in any way, as
this may reduce the receiver's sensitivity (range).
The Parakey provides four programmable outputs (OUT1 to
OUT4) each of which can be programmed for a variety of
home/office automation applications, such as opening a
garage door when button 1 is pressed on the remote control.
Please refer to figure 1 and section 4 for more information.
There are two types of hand-held PARAKEY remote
controls. There is a 2-button RF transmitter and a 4-
button RF transmitter. Each button can perform different
actions depending on how the system is programmed.
These remote controls can transmit a signal up to a
maximum of 54 meters (175ft). The remote controls are
powered by a 3V lithium battery. Occasionally this battery
must be changed as shown in figure 2. References to
button 3 and button 4 indicate keys on the 4-button
remote control only.
2.6 Hand-Held Remote Control
2.5 Programmable Outputs (PGMs)
2.4 Antenna
6
7