![background image](http://html1.mh-extra.com/html/paradox/mg5050/mg5050_programming-manual_3708818028.webp)
28
Programming Guide
Table 7: IP/GPRS Registration Status
WinLoad / BabyWare / PCS Series Connection Settings
Refer to the
on page 65 for alternate programming of PC phone number, panel ID, and PC password.
Communication Report Codes
Communication Restore Report Codes
Main Menu Trouble
Sub-Menu Trouble Menu
[1]
IP/GPRS module registration status
[1]
OFF = Unregistered
[1]
Slow Flash = Registering...
[1]
ON = Registration OK
[2]
IP/GPRS module error
[7]
No IP/GPRS module
[8]
Ethernet cable unplugged/GSM no service
[9]
No IP address acquired by module/GPRS network trouble
[3]
IP/GPRS programming error
[7]
No IP address (not programmed)
[8]
No IP port (not programmed)
[9]
No IP account (not programmed)
[10]
No Access point name (not programmed - GPRS only)
[4]
IP/GPRS registration error
[7]
Cannot connect
[8]
Invalid profile
[9]
Invalid format
[10]
Account already registered under another MAC address
Register module
When all troubles are cleared, press
[
ARM
]
to register module.
[780]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
SMS
SITE
NAME
[920]
____/____/____/____/____
PORT
(
DEFAULT
= 10000)
[921]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
ACCESS
POINT
NAME
(
APN
)
PART
1 (
E
.
G
.
INTERNET
.
COM
)
[922]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
ACCESS
POINT
NAME
(
APN
)
PART
2
[923]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
USER
NAME
PART
1
[924]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
USER
NAME
PART
2
[925]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
PASSWORD
PART
1
[926]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
PASSWORD
PART
2
[927]
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/
INSTALLER
SOFTWARE
PASSWORD
(W
IN
L
OAD
/ B
ABY
W
ARE
) (
DEFAULT
=
ADMIN
)
[879]*
____/____
PCS Series RF jam
[880]
____/____
N/A
____/____
PCS Series no service
____/____
IP100 no service
____/____
PCS Series module supervision lost
____/____
IP100 supervision lost
____/____
Receiver fail to communicate (GPRS)
____/____
IP receiver fail to communicate
[881]*
____/____
PCS Series RF jam
[882]
____/____
N/A
____/____
PCS Series no service
____/____
IP100 no service
____/____
PCS Series module supervision lost
____/____
IP100 supervision lost
____/____
Receiver fail to communicate (GPRS)
____/____
IP receiver fail to communicate
* This section also applies to GSM communication programming.
Summary of Contents for MG5050
Page 71: ......