10
User Guide
One-Touch Arming
One-Touch arming allows you to arm the system without using an access code. This feature must be enabled by your installer.
If One-Touch Arming is programmed, you can increase the security level of your system (from Disarm
Stay Arm
Sleep Arm
Full Arm)
without a code. See Figure 4 on page 10.
One-Touch Regular Arming
Press and hold the
[
ARM
]
key to arm all zones in the partition. If partitioned, keys
[1]
&
[2]
will flash. You can use this feature to allow
specific individuals like service personnel (e.g. cleaners) to arm without giving them access to any other alarm system operations. See
Regular Arming
on page 9.
One-Touch Stay Arming
Press and hold the
[
STAY
]
key to arm the perimeter (zones not defined as Stay zones). See
Stay Arming
on page 9.
One-Touch Sleep Arming
Press and hold the
[
SLEEP
]
key to arm all zones not defined as Sleep zones. See
Sleep Arming
on page 9.
One-Touch Bypass Programming
Press and hold the
[
BYP
]
key to access Bypass Programming Mode. See
Manual Bypass Programming
on page 11.
Fast Exit
When the system is already Stay or Sleep armed: This feature will allow you to exit already armed premises and keep the system armed.
Press and hold the
[
OFF
]
key for to start the exit delay. After the exit delay has elapsed, the system will switch to its previous arming
mode.
Figure 5: Arming/Disarming
Auto-Arming
The alarm system can be programmed to automatically arm upon the following two conditions:
Timed Auto Arming
The alarm system can automatically arm itself at a specified time every day. As with Regular arming (see
Regular Arming
on page 9), the
system will bypass any open zones.
How do I program the Auto-Arm Timer?
1 Press the
[ ]
key.
2 Enter
[
MASTER
CODE
]
.
3 Press the
[
BYP
]
key. The
[
BYP
]
key will flash to indicate you are in the System Options menu.
4 Press key
[1]
to set partition 1, or press key
[2]
to set partition 2.
5 Enter the desired time for auto arm (24 hour clock, e.g. 18:30).
6 Press key
[1]
to regular arm, key
[2]
to sleep arm, or key
[3]
to stay arm the partition.
ARM
SLEEP
STAY
OFF
No Code
No Code
No Code
To Disarm:
[
OFF
]
+ Code
To Sleep Arm:
[
SLEEP
]
+ Code
No Code
To Disarm:
[
OFF
]
+ Code
To Stay Arm:
[
STAY
]
+ Code
To Disarm:
[
OFF
]
+ Code
