20
HD77 Installation Guide
Figure 16 – HD77 Video Stream in BabyWare
4. Configure PIR settings.
Note:
Always do a Receive Programming before configuring.
Figure 17 – Receive Programming
5. Select the configuration parameters (See
Figure 18 on page 21
):
• Show PIR LED
Check this box to activate LED#3 to display when PIR motion is detected LED#3 lights up Red.
When this box not checked LED#3 stays off when PIR motion is detected.
– Default is on.
• PIR sensitivity level – Default is #3.
Sensitivity level 1 is low sensitivity, useful for a room with large windows, or a small room.
Sensitivity level 5 is high sensitivity, useful for a large room with small windows.
• PIR Security level – Default is Normal.
