HD77 Installation Guide
17
Note:
As a suggested standard try to assign the port so that it has 10 + the last section of the IP address.
In step 5 above notice that The IP address is 10.0.0.166 and the port # is 10166. The port number is
chosen arbitrarily by the installer. Choosing the port number to match the IP address will make
configuration easier.
Example of IP addresses and ports for 4 cameras.
Note:
Each camera needs a separate IP address and matching external port.
Figure 13 – HD77 IP Address
Note:
The IP Exploring tool must be closed before you try and connect to the EVOHD panel through
BabyWare.
3.2 Reserve the IP or Bind the IP to a MAC
You need to bind the IP address of the HD77 to a MAC address in your router. This is called reserving an IP
address or binding an IP address.
This is done on the router, just like you connected to the router for port forwarding you will need to connect for
reserving a port. This should be under the LAN properties.
Table 2: List of Cameras
Camera name
Location
IP Address
External port
number
Internal port
number
Living room
facing front door
10.0.0.166
10166
80
10167
443
Den
facing sliding rear
door
10.0.0.168
10168
80
10169
443
Safe room
facing the safe
10.0.0.170
10170
80
10171
443
2nd floor
looking down the
staircase
10.0.0.172
10172
80
10173
443
