background image

SPECIAL KEYS AND FUNCTIONS

N

Key 

[10]

Regular arming is activated.

N

Key 

[

STAY

/11]

Stay arming is activated (Arms system A only,

when partitioning is enabled)

[1]

and 

[3]

* Police or 

N

Silent  

N

Audible  

N

Not Used

[4]

and 

[6]

* Auxiliary or 

N

Silent  

N

Audible  

N

Not Used

[7]

and 

[9]

* Fire or 

N

Silent  

N

Audible  

N

Not Used

* Both keys must be depressed at the same time for 2 seconds -
Armed LED will flash.

The

PGM

(Programmable Output) functions (if applicable), are:

1)___________________, activated by 
2)___________________, activated by 

SYSTEM TIMES

Entering and exiting your premises is permitted through doors
that you and your installer have determined. You have one exit
time and up to two individual entry times i.e. Zone 1-

Front door

delay 1 (30 sec)

, Zone 7-

Garage door delay 2 (90 sec)

You have 

seconds to 

EXIT

your premises.

Your Entry 

delay 1 

is 

sec. and you may enter thru zone #

.

Your Entry 

delay 2 

is 

sec. and you may enter thru zone #

.

Your Siren, if activated by an alarm, will sound for 

minutes.

OTHER INFORMATION

This alarm system was installed on: 

By: 

Service is provided by 

Tel: 

Your monitoring station's phone number is: 
Your account number is: 
Your alarm transformer location is 

and is on circuit #

.

UM639

29

N

4 digit

N

6 digit

Name

Code                           Arming Priority

Regular  Stay/A  Away/B   Byp

User 26

NNN N

User 27

NNN N

User 28

NNN N

User 29

NNN N

User 30

NNN N

User 31

NNN N

User 32

NNN N

User 33

NNN N

User 34

NNN N

User 35

NNN N

User 36

NNN N

User 37

NNN N

User 38

NNN N

User 39

NNN N

User 40

NNN N

User 41

NNN N

User 42

NNN N

User 43

NNN N

User 44

NNN N

User 45

NNN N

User 46

NNN N

User 47

NNN N

User 48

NNN N

NOTE: FOR SECURITY REASONS, WRITE ONLY USER
NAMES, AND NOT ACTUAL ACCESS CODES!

UM639

28

Summary of Contents for Esprit 639


















Reviews: