NVX80 Installation Manual
19
3.9 Settings
3.9.1 Settings Sub-Menu
Menu Item
Description
Show Event(s)
Select the events to be displayed on the OLED
Note: Selection do not affect the operation, only the
display
Alarm - Alarms are shown
Pre Alarms - Pre Alarms (MW, PIR, Creep) are shown
Trouble - Trouble events are shown
Anti-Mask - Anti-mask Events (IR Anti-mask and MW Anti-
mask)
Restore Settings
Restore detector settings that were previously stored by
‘‘Save Settings’’ option
Save Settings
Save detector settings
Reset
Reset all detector settings to factory defaults
Menu Color
Select menu color for better visibility and fun!
Brightness
Select the general brightness of indications
Note: The menu is always shown on maximal brightness
except for the brightness screen which demonstrates the
chosen brightness
Display On/Off
Turns the Display On or Off
On - OLED will display messages and notifications
Off - OLED will not display messages and notifications. The
Display is turned Off when the tamper is closed. When the
tamper switch is open the Display is turned On and the
user may program the unit.
Installation specific settings can be
saved
and
restored
if altered. Settings can also be reset to factory defaults, all with the push of
a button. Setting changes occur once the “OK” button is pushed. Changes will not be saved if the “back” button is pushed.