Proximity Reader 13
This feature only applies when Face Light
Operation programmed in Section [103] is
set for Option [0]: Face Light constant.
CHANGING THE INSTALLER CODE
Section [200] - Default: 000000
The Installer Code is used to enter the reader’s
programming mode. The Installer Code is six digits
long where each digit can be any value from 0 to 9.
PANIC ALARM
A panic code can be generated and transmitted to
the controller by pressing and holding the [
CLEAR
]
and [
ENTER
] keys for 2 seconds (26-bit Wiegand =
255:65534; 37-bit Wiegand = 65535:65534).
This feature only applies when the
communication format programmed in
Section [002] is set for Option [1]: 26-bit
Wiegand or Option [2]: 37-bit Wiegand.
RESETTING TO DEFAULT
To reset the reader to factory defaults, disconnect
its power supply. Press and hold the [1] and [2]
keys simultaneously while reconnecting its power
supply.
Enter Description
[0]
Blue Face Light.
[1]
Green Face Light.
