manualshive.com logo in svg

Paradise Datacom P300-IBS, Installation & Operating Handbook

The Paradise Datacom P300-IBS Installation & Operating Handbook is a reliable manual that provides step-by-step instructions for setting up and using the P300-IBS product. This comprehensive manual is available for free download on our website, ensuring easy access to all the necessary information you need.

Share
Download
background image

P300H

P300 Modem Installation and Operating Handbook

Page 28

Timeslot Selection

Independent selection of arbitrary timeslots for both Drop and Insert.

Bearer Generation

The terrestrial bearer may be looped through the Drop mux then Insert
mux, or terminated after the Drop mux and a new blank bearer
generated by the Insert mux. The bearer generated within the Insert mux
provides full multiframe and CRC support and may be generated from
the Tx Clock, Station Reference, Satellite Clock or Internal reference.

Bearer Backup

In the event that the Insert mux bearer clock is lost, or AIS is supplied,
then the Insert mux will switch temporarily to bearer generation mode in
order to preserve the receive traffic. The backup bearer may be
generated from the Station Reference, Satellite Clock or Internal
reference.

Terrestrial CRC

Fully supported, with front panel display of terrestrial error rate based on
CRC (T1-ESF and G.732) or Frame Alignment Word errors (all bearer
types)

Timeslot ID Maintenance

The IBS/SMS or Closed Net plus ESC overhead maintains the identity
of individual D/I timeslots for N=1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 16, 20, 24,
30 (see Extended D/I Feature below).

[Extended Drop/ Insert Feature]

Timeslot Re-ordering 

Selected timeslots may be independently re-ordered on both Tx and Rx
paths.

Timeslot ID Maintenance

The IBS/SMS or Closed Net plus ESC overhead is extended to maintain
the identity of individual D/I timeslots for 

all values

 of N from 1 to 31,

including the previously unavailable values N=7, 9, 11, 13, 14, 17 - 19,
21 - 23, 25-29, and 31.

Multi-destinational working

All or only a subset of the received data may be inserted into the
terrestrial bearer on the receive path for multi-destinational working. 

Signalling

Both Channel Associated Signalling (CAS), and Robbed Bit Signalling
(RBS) are fully supported:

For E1 G.732 Drop/Insert, CAS signalling is extracted from terrestrial
TS16 and carried over the satellite in IBS/SMS TS16 and TS48
before re-inserting into the distant terrestrial TS16

For  T1-D4 and T1-ESF RBS the IBS or Closed Net plus ESC
overheads maintain the identity of the in band signalling, and it is
re-inserted into the terrestrial multiframe in the correct positions to
maintain the RBS.

[Async ESC Feature] & Aux Data Channel

ESC/Aux Port

A single port provides the interface for optional high rate async ESC
(IBS/SMS or Closed Net plus ESC), or the INTELSAT low rate async IBS
ESC channel.

Summary of Contents for P300-IBS
























































































































































































































Reviews:

No comments

Related manuals for P300-IBS

DAVIS Vantage Connect Manual preview
Vantage Connect
Brand: DAVIS Pages: 12
Atlantis Land I-STORM USB A01-AU1 (French) Caractéristiques preview
I-STORM USB A01-AU1
Brand: Atlantis Land Pages: 2
Arris TM02AA104 Installation Manual preview
TM02AA104
Brand: Arris Pages: 52
Skypatrol ST8050 User Manual preview
ST8050
Brand: Skypatrol Pages: 33
Futurebit MOONLANDER 2 SCRYPT User Manual preview
MOONLANDER 2 SCRYPT
Brand: Futurebit Pages: 12
TSI Instruments NETRONIX THIAMIS 8535 Quick Start Manual preview
NETRONIX THIAMIS 8535
Brand: TSI Instruments Pages: 4
Sierra Wireless MP597 Quick Start Manual preview
MP597
Brand: Sierra Wireless Pages: 13
ADF Web HD67302-B2 Series User Manual preview
HD67302-B2 Series
Brand: ADF Web Pages: 20
Sierra Wireless GL6100 User Manual preview
GL6100
Brand: Sierra Wireless Pages: 96
COM 21 DOXport 111 User Manual preview
DOXport 111
Brand: COM 21 Pages: 23
Pan Dacom SPEED-DSL 2.3 Manual preview
SPEED-DSL 2.3
Brand: Pan Dacom Pages: 12
Paradyne COMSPHERE DualFlow 3616 User Manual preview
COMSPHERE DualFlow 3616
Brand: Paradyne Pages: 139
Zte K3770-Z Quick Manual preview
K3770-Z
Brand: Zte Pages: 9
DECODE IDM 50B User Manual preview
IDM 50B
Brand: DECODE Pages: 23
Converters.TV 524 Operation Manual preview
524
Brand: Converters.TV Pages: 7
O2 E160 Quick Start Manual preview
E160
Brand: O2 Pages: 56
XAVI Technologies Corp. X8124r User Manual preview
X8124r
Brand: XAVI Technologies Corp. Pages: 74
Observa Telecom QX301A User Manual preview
QX301A
Brand: Observa Telecom Pages: 28

Brands by name

Popular brands

Load more brands