Pantum PT16B2B Series, User Manual

Page: 35 / 60

26
Push Scan
This section is mainly to introduce how to scan files to PC, E-mail and FTP with the printer's control
panel.
Note: • For a single page scanned to PC/E-mail/FTP, you can save it as PDF, TIFF, JPEG or OFD.
• If you choose to scan to PC with N-UP Scan under the ADF scanning mode, the scanned
documents will be PDFs by default; For those scanned to E-mail/FTP with N-UP Scan, you
can save them as PDF, TIFF, JPEG or OFD.
Scan to PC
You may operate the printer's control panel to scan a file to PC. (Only support connection method
of USB connection line.)
1. Be sure the printer and the computer are both switched on and connected with each other
properly.
2.
Put an original on the glass platen or into the ADF.
3. Press "Scan" button on the control panel, and press “ ▲ ” or “ ▼ " to select "Single Page Scan" or
"Merge Scan", then press "OK" button.
4. Press "Menu" and then "OK" to enter the "Scan Setting" interface.
5. Press "
▲
" or "
▼
" to select the options under "Scan to", and then press "OK".
6. Select scanning parameters according to your needs, then press “Start” to start scanning.
7. If you want to perform a merge scan, place the documents that you want to continue scanning
on the glass platen, press the "Start" button and proceed with scanning the second page. (ADFsd
can make scan continuously without interruption.)
Scan to E-mail
You can scan the file as an attachment into the email application. The steps are as follows:
1. Be sure the printer and the computer are both switched on and connected with each other
properly.
2. Set up SMTP client.
3. Configure the E-mail address book.
4.
Put an original on the glass platen or into the ADF.
5. Press "Scan" button on the control panel, and press “ ▲ ” or “ ▼ " to select "Single Page Scan" or
"Merge Scan", then press "OK" button.
6. Press "Menu" and then "OK" to enter the "Scan Setting" interface.
7. Press "
▲
" or "
▼
" to select the options under "Scan to", and then press "OK".
8. Press " ▲ " or " ▼ " to select "Scan to E-mail" and press "OK" button.
9. Press “ ▲ ” or “ ▼ " to select "E-mail Address Book" or "Group Mail" and press "OK" button.
10. Press "
▲
" or "
▼
" to select the address or group. Press "OK" button. Press "Start" to start the
scan.