Pantech GB 200, User Manual

Page: 23 / 77

45
Once a call is held, the name and icon of the caller will
be faded in gray.
To make a call while you have a call in progress:
1
Enter the phone number that you want to dial or look it up in the
Contacts.
2
Press the key to dial the second call.
ContactsThe first call is automatically put on hold.
To switch between two calls, simply press the [Swap]
Soft key.
The current call is placed on hold and the call on hold
is reactivated so that you can continue conversation
with the other person.
If you want to finish, complete each call normally by
pressing the [ ] key.
Answering a Second Call while You are on
a Phone Call
You can answer an incoming call while you have a call
in progress, if this service is supported by your network
service provider and you have activated the [Call
Waiting] option (see menu 6.2.4). You will be notified of
an incoming call by a call waiting tone.
To answer a call while you have another call in
progress:
Options in Calling
44
Options in Calling
During a call, press the [ ] key to show the call
option.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone
off so that the other person cannot hear you.
For example, you may wish to say something to
another person in the room but do not want the calling
person to hear you.
Press the [Mute] Soft key shortly.
Or, select Option followed by ‘Mute’ to activate the
Mute function.
To switch the microphone back on:
Press the [Sound] Soft key shortly.
Or, press the [Option] Soft key and then press the
[Select] Soft key or [OK] key, when [Sound] highlights.
Putting a Call on Hold
You can place a current call on hold whenever you
want. You can make another call while you have a call
in progress if this service is supported by your network
service provider. Of these two calls, one is active and
the other is on hold and you can switch between the
calls.
To place a call on hold, simply select the [Option] Soft
key followed by [Hold], or press the [ ] key.
You can reactivate the call whenever you want by
selecting the [Option] Soft key followed by [Retrieve].