7
3 - OPERATION
3.1 Initial
Setup
When the receiver is powered on for the first time, the main menu will appear.
When first powering on the unit, please do the following:
1. Select the System Setup
2. Switch the language using the
◀
▶ buttons.
Confirm
the language by pressing [OK].
3. Select installation on the main menu and configure
antenna setting (See section 3.2)
4. Adjust the LNB configuration for each satellite
5. Start scan to find programs
6. Exit the installation after all programs are scanned
and found
Use the
◀
▶
▲
▼
buttons to navigate the menu and press
[OK] on the remote to make the selections.
3.2 Installation
The Installation menu is located on the main menu.
3.2.1 Antenna Connection (Compatible with Two Tuner Model)
Use the
◀
▶buttons to set the “Antenna Connection Type”.
3.2.2 Satellite List and Antenna Setup
You can Edit, Add, or Delete entries in the Satellite List
Select Tune LNB1 or LNB2, Satellite, LNB Type, transponder
and DiSEqC(1.0 and 1.1).
