Pansat 9500HDX, User Manual

Page: 13 / 21

12

Use the Menu Lock to enable/disable password entry into Edit Channel/Installation/Tools menus.

Use the Channel Lock to enable/disable the password requirement for locked channels.

To change the password, select New Password. Use the numerical buttons to enter the new password when
prompted. The user will be asked to re-enter the new password to confirm. If both entries match, the new
password will be saved and you will be taken to the System Setup menu.

Press [Exit] to leave the Parental Lock menu.
3.4.7 OSD Setting

You can adjust the OSD timeout and transparency by using the
◀ ▶ buttons.
3.4.8 Favorite

Press [OK] to rename the favorite group.
1. Press the red button to switch to capital.
2. Press the green button to delete the character.
3. Press the yellow button to save the modification.
4. Press the blue button to cancel the operation.
3.4.9 Others

LNB Power: If turned On, the receiver will supply power to the satellite antenna. If the setting is Off, the receiver
will not supply power to the antenna.

Channel Play Type: You can choose to play Free, Scrambled, or All channels.

Press [Exit] to exit the “Other” menu.
3.5 Tools
3.5.1 Information
Show the system information including model name, boot version, main, and dB code.
3.5.2 Factory Setting
Use is option to revert the system to the default factory settings.

Select “Yes” to continue

Enter the 4 digit password when prompted and press [OK]. The default password is “0000”. If you have forgotten
your password, contact your dealer for a master factory password.

If you do not wish to proceed, press [Exit] before password is entered.
3.5.3 Upgrade via RS232 (Receiver to Receiver)

Connect the master and slave receivers with a Null Modem RS232 Cable (Pins #2 and #3 twisted).

Connect the master receiver to the TV and select transfer mode.

Power on the slave receiver.

Select “Start on the master receiver screen and press [OK] to start the upgrade.

When finished, press [Exit] button to save the parameters and exit
WARNING! Do not disturb the data transfer by pressing any remote control buttons or disconnecting the RS232 cable,
IF cable, RCA cable, etc. during the data transfer until the “Please wait for saving” message disappears.
3.5.4 Upgrade via USB