4.
On under side of panel, assemble
M12 hexagon socket head cap
screws with suitable M12 nuts and
washers. Assemble N-connector nut,
shake proof washer and washer.
Washer Assembly
5.
Tighten the two N connector nuts to
5Nm and the four outer nuts to 6Nm.
Tighten
6.
Seal area between M12 screws
and antennas base with a suitable
silicone sealant and assemble M12
screw caps (supplied).
Seal and Cap
Waiver: This document represents information compiled to the best of our present knowledge. It is not intended to as a representation or warranty of fitness
of the products described for any particular purpose. This document details guidelines for general information purposes only. Always seek specialist advice
when planning installations and ensure that antennas are always installed by a properly qualified installer in compliance with local laws and regulations.
Panorama Antennas Ltd.
| 61 Frogmore, Wandsworth, London, SW18 1HF, UK |
Phone:
+44(0)20 8877 4444
x 2
x 4
TRNM Install Guide
- www
.panorama-antennas.com
