SCANNDY MANUAL
Page 20
Transmitting data from a Bluetooth or Wi-Fi device
When the scanner is paired to a host via Bluetooth, data transmits to the host
after each scan and is not stored on the scanner unless the scanner moves
out of range of the host. For out of range usage you can configure the device to
either store the data in a cache memory or do not allow scanning.
If the device was configured to store the out of range captured data, it stores
the data in a file Cache.txt. After reconnect it transmits all cached data to the
host. (See the SFL reference manual to see how to set the device to cache out
of range data)
Bidirectional communication for Bluetooth and Wi-Fi
connected devices
For applications that require bidirectional communication between the device
and the host, PANMOBIL devices support an embedded communication
protocol SCOMP and REMOTE mode.
(See the SCOMP reference manual to see how to set the device to use SCOMP
protocol and/or REMOTE mode)
Note!
If the device is set to use SCOMP communication protocol, it is mandatory for
that the host application to support SCOMP protocol, too.
