SCANNDY MANUAL
Page 14
BLUETOOTH CONNECTION
Pairing
For Bluetooth enabled devices to pair to a Bluetooth enabled host.
Note!
The following description is only valid for devices with factory installed
software. Devices with custom software can behave different, depending on
the programming.
1.
Connect the device to the host using the USB port and brows the drive
“Scanndy”. And search for the file *.sfl
2.
Open the file *.sfl with the text editor and verify the setting for the
Bluetooth profile
Example for Bluetooth SPP (SerialPortProfile)
Config {
[Uni]
Outmode=btser
}
Example for Bluetooth HiD (HumanInterfaceDevice)
Config {
[Uni]
Outmode=bthid
}
Set the Bluetooth profile supported by the host or required by the
application.
•
Serial Port Profile (SPP) - The scanner connects to the host via
Bluetooth and emulates a serial connection. The scanner accepts an
incoming connection requested from a Bluetooth host.
