SCANNDY MANUAL
Page 33
Menu item UHF Settings
Highlight the menu item “UHF Settings” and press the left (7) navigation key to
enter the configuration for the UHF RFID reader/writer.
Region
Highlight the menu item “Region” to set the frequency for the region the
device is used.
Note!
Changing the frequency (Region) may have influence on the UHF
reading/writing performance because of the mismatch with the reader
antenna.
Press the left navigation key (7) to save the settings and return to the UHF
Setting menu or press the right navigation key (9) to cancel.
Power save mode
Highlight the menu item “Power save mode” and press the left navigation key
(7) to change the settings. Select the power save mode value and press the left
navigation key (7) to save the settings and return to the UHF Setting menu, or
press the right navigation key (9) to cancel.
Select
Back
Region
Power save mode
R/W Power (cdbm)
*Fast comm.
Gen2 session
