Polar Bear III HD 5 Degree Installation Manual
9910034 Rev F
18
items are suggested as a minimum to avoid injury based on the installation procedure outlined in this
manual:
1.
Appropriate work clothing
2.
Electrically insulated hard hat
3.
Protective eyewear
4.
EH rated safety boots
5.
Gloves
6.
High-visibility safety vest
7.
Hearing protection
If any PPE appears to be defective, stop the use of such equipment immediately, and ensure it is
replaced before work continues. Refer to OSHA Part 1926 Subpart E
–
Personal Protective and Life
Saving Equipment for additional information.
Hand and Power Tools:
Access to all hand and power tools should be regulated and controlled at all
times on site to prevent improper use and related injuries. When not in use, all equipment should be
stored in a secured location. Only personnel who have been properly trained in the safe operation of
any potentially dangerous tool should be allowed access. All required tools to perform the installation of
PanelClaw racking are outlined in the installation procedure. All tools should be inspected daily and
before use by the operator. If any tool appears to be defective, stop the use of such equipment
immediately, and ensure it is replaced before work continues. Electrical power tools should follow
proper lock-out tag-out procedures per OSHA requirements. Refer to OSHA Part 1926 Subpart I
–
Tools
–
Hand and Power for additional information.
