VeriSafe 2.0 AVT
18
June 2022
SYSTEM CABLE REMOVAL (BATTERY POWERED INDICATOR MODULE)
1.
Grip the retention spring on both
sides .
2.
Pull down on the retention spring
approximately 1/16 inch [1 .5 mm] .
3.
Continue holding the retention
spring down while pulling back on
the right-angle connector to release
the system cable .
O-RING AND GASKET REPLACEMENT
The o-rings and gaskets can be replaced if they become dry or brittle . In critical sealing applications, such as wash down envi-
ronments, it is recommended that the o-rings and gaskets be replaced every 5 years .
BATTERY FREE INDICATOR MODULE
For the battery free indicator module, order Panduit SKU
VS2-AVT-GASKET
for gasket replacement kit .
1.
Unplug the system cable and remove the panel nut .
2.
Squeeze the top and bottom of the housing and pull
back to release the latches from the faceplate .
3.
Separate housing from faceplate and replace gasket .
Indicator
Module
Faceplate
Instruction Label
Indicator
Module
Housing
Panel
Nut
Gasket
BATTERY POWERED INDICATOR MODULE
For the battery powered indicator module, order Panduit SKU
VS-AVT-ROR
for o-rings and gasket replacement kit .
1.
Unplug the system cable and remove the panel nut .
2.
Replace the gasket and o-rings .
3.
Apply a light coating of silicone grease to the o-rings to pro-
mote sealing and extend o-ring life .
Cap Closure
O-Ring
Sealing O-Ring
Gasket
